Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as aluminum or timber.
It is important to clean and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and also improve the efficiency of energy.
1. Broken Glass
If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to ensure that you’re doing all you can to keep your windows in good condition.
Single-pane windows are relatively simple to replace and will usually fit into the old frames very easily. If windows with double panes are held together by internal beading, it is more difficult to remove and replace the old panes. In this situation you’ll need source some plastic spacers that assist the new pane to fit correctly into the window frame.
If you are going to attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall onto the cloth instead of onto the floor, where they could be trodden under and cause further damage.
It’s a great idea to tape the gap once the glass has been removed. This will stop drafts and water from entering your property until a professional comes out to repair the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap between the door and the window is large, you might prefer a security screen that also includes windows. This will provide the best of both.
2. Sagging
uPVC is durable, energy-efficient and affordable alternative to timber sash windows. In time, they could be affected by a variety of issues, including sagging. A window that isn’t properly aligned can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it’s important to act quickly to stop the issue from getting worse.
Repositioning the hinges could aid in fixing a window which is sliding. To do this, you’ll have to open the window so that you can access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you’ve adjusted the hinges, close the window and check for an appropriate fit. If you’re satisfied with the fit, tighten the screws to ensure that they stay in position.
If you are unable to reposition the hinges, uPVC window repair you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. If this happens, it’s essential to replace the seal as fast as you can to ensure that your Upvc Window Repair windows are watertight and safe from drafts.
uPVC handles can also loosen up. Most often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It’s relatively easy to fix a loose uPVC handle. First, you’ll need to close the window and do a test fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn’t, you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into its original position.
3. Water Leaks
It is crucial to take action if you wake up every morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is a fairly simple fix and should be undertaken by any DIY expert. Depending on the severity of the problem is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce your energy efficiency.
It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you may need to think about replacing the window.
Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.
If the leakage is occurring between the double-glazed glass it is more likely the problem is with the seal than the frame. This can be easily corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault when your uPVC window is difficult to open or it blows open with an ease. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.
Almost every household in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It is very easy to change a window hinge but it’s much simpler if you have someone to help you hold the frame.
It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.
The issue could be caused either due to opening the window repairs near me in the wrong way or by a poor installation in the factory. This issue can be fixed by sending us a photograph on our website. We will be happy to give you advice.
Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.
5. Draughts
Draughts in upvc windows can be caused by a few different things. The hinges, also due to wear and tear could become misaligned. This causes an opening to appear between the sash and the frame. If they’re beyond repair, it may be required to realign them. Second, the interlock can also become misaligned. This happens on the hinge’s side and could require to be cleaned. In some cases it is possible to replace them.
The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce draughts.
The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They can help keep cold air out and keep your home warm and cozy!
Your upvc windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it may be more cost-effective to simply replace them rather than repair them. So, if you’re experiencing issues with your Upvc windows, it is best to seek professional assistance immediately.