Ghost Immobiliser Problems and Solutions
Cars are expensive possessions that we spend years saving for. It can be very upsetting when your joy and pride is stolen.
However, if you’ve had the ghost immobiliser installed by a reputable fitter such as Car Theft Solutions, it can prevent thieves from taking your vehicle in just a few minutes.
1. No stop or start
The autowatch ghost immobiliser Ghost CAN immobiliser has been designed and developed to be one of the most effective security systems available. It operates by using buttons on the centre console or steering wheel, as well as pedals to input a pin number into the vehicle’s system, which will then turn off the engine. This will prevent the thief stealing your vehicle even if he has the fob or keys.
The Ghost also comes with high-security features to stop the device being compromised or hacked by thieves. This includes CAN bus blocking and cutting through the immobiliser. Together with an insurance approved marking system, the odds of your car being stolen are virtually nonexistent.
This system also works with your vehicle’s factory fitted immobiliser to add an additional layer of security stopping the thief from getting into your car, even if they have your key or fob. This safeguards your resale and keeps you and family safe.
If your Ghost has stopped functioning, it could be an an indication of other problems that aren’t related to Ghost. Try entering valet or service modes on your Ghost to test this. This will disconnect your Ghost from the vehicle and you will be able to start your vehicle. If you’re unable to do this, there may be a problem with your Ghost installation.
You should not attempt to remove a ghost yourself unless you are an expert. This is because you work with a complex and sensitive system that directly controls your engine. It’s dangerous and could cause serious damage if you use it improperly. It is recommended that you contact your installer for assistance.
2. No ignition
Immobilisers are used in modern vehicles to stop the vehicle from starting if your key isn’t compatible with the one programmed within. This works by sending a transponder code from the key to the immobiliser which then compares it with the codes stored in it. If the codes are the same the engine will begin. However, a number of factors can cause this system to fail, including a missing or stolen key or a damaged or uncoded transponder, as well as electrical issues such as broken immobiliser antenna wiring, which is usually wrapped around the ignition cylinder. Multiple keys can also cause confusion with the codes, for example, the spare key or a car with two transponders on the same key.
As a result, when the immobiliser doesn’t function properly, it could be impossible to start the vehicle, which would give thieves the impression that the vehicle is not functioning properly. system, and they could take off with your joy and pride. This is why it’s an important investment for anyone who owns a car, especially those with prestige vehicles that are difficult to sell after being stolen or damaged.
The ghost immobiliser is a discrete device that can be concealed almost anywhere in your vehicle which makes it unnoticeable to car thieves. It uses buttons on the steering wheel, door or central console to generate an individual PIN code that only you know. This ensures you are the only person who can drive your vehicle. It is not equipped with LED indicators and is silent and therefore thieves won’t even know it’s there. The Ghost is TASSA accredited and Insurance Approved. This means it can be installed by an approved installer. It also helps to safeguard your investment from key cloning and hacking.
3. No engine start
It’s not surprising that people are seeking to add an extra layer of protection. With car thefts on the rise and keyless entry vehicles being a prime threat to thieves, it’s no surprise that people are looking to add an extra layer of security. One of the most effective ways to accomplish this is by installing an immobiliser ghost. This patented device shields your vehicle from theft and damage using some of the most innovative technologies in the market today.
The Ghost is a brand new security system, unlike traditional systems that rely on key fobs or LED indicators. It uses an exclusive pin code sequence that only you are able to identify to start your vehicle. The device is connected to the vehicle’s CAN data network, and then programmed to secure it by through buttons on the dash and steering wheel. It will then prevent the engine from starting unless you enter your pin code first. This is done completely silently – no clicks like other systems. This means that it’s nearly impossible for a burglar to recognize.
If needed, it will also disable stop/start eco mode. This will be done differently on each vehicle but is usually similar to the system is stalling or locking the gearbox in P. This can be done without or with the activation of the anti-hijack feature.
Ghost immobilisers protect your vehicle in a very effective way. They can be used with any key or even an extra. It can be used to stop all types of theft, including key cloning, hacking, and ECU swapping. It also helps prevent damage to your vehicle by detecting vibrations or tampering. Ghost immobilisers can also protect the value of your vehicle by making it less attractive to thieves, so is definitely worth considering.
4. Keyless entry is not possible.
The last thing a car owner would like to experience is being the victim of their pride and joy stolen. You might have spent a long time building up your savings for a vehicle or perhaps you own an expensive car you are proud to display. The loss of a vehicle is a very painful experience, regardless of whether you’ve put money into it or not. With the right security system you can guard yourself against even the most clever of thieves.
Ghost 2 immobilisers, unlike Faraday bag or wheel locks, can be installed discreetly in your vehicle without damaging your vehicle. They will only allow you to start your car if the unique code is correctly entered. You can change the pin code as many times as necessary. The device is different on each vehicle so that thieves won’t even be aware it’s there.
Ghost II connects to your vehicle’s CAN system. It communicates on the CAN data loop. This means that Ghost II isn’t able to be detected by thieves using scanners using RF or code grabbing. It can’t be bypassed by adding a new key or replacing the ECU as only the correct pin code will allow your Lexus to begin.
Our TASSA-accredited Ghost 2 immobiliser has been approved by insurance companies. It will provide peace of mind knowing your vehicle is secure from theft via contactless. This will not only aid in recouping any losses incurred by theft, but it will also make it difficult for potential thieves to sell your car in the future as they’ll know that it is equipped with an anti-theft security system installed. This could save you thousands of dollars on resales.
5. No alarm
A ghost immobiliser, one that is technologically advanced and installed in your vehicle to protect it from being taken. It stops your vehicle from being stolen by preventing the engine from running until you enter a pin-code code that you are familiar with.
This is an excellent anti-theft system as unlike the wheel lock or car alarm, a ghost immobiliser cannot be removed, jumped started or spoofed. If a thief tries to steal your car using this method, they’ll discover that it isn’t starting, Ghost Immobiliser Problems and they will be forced to turn the vehicle around and leave the scene without it.
The technology has improved to deter thieves from taking the pride and joy of your life. This is why it’s crucial to protect your vehicle with an immobiliser ghost. They’re not just affordable however, they also protect your vehicle with great effectiveness.
They’re subtle and barely noticeable, so a thief will not be able to detect them. The device is able to be used with a car tracker, so you’ll always know the location of your car and ensure it’s secure.
The Ghost CAN immobiliser was the first aftermarket CAN bus lock. It was designed to guard against key cloning or hacking and key theft. It’s also TASSA-certified which proves its reliability. The device can be inserted inside your vehicle at a hidden location, works quietly, doesn’t emit radio signals, and is unnoticeable to the naked eye. It is less expensive than a traditional car alarm, and does more to deter thieves from stealing the vehicle in the first place. This will provide you with peace of mind and make your vehicle more secure than ever.