How to Replace a UPVC Window Handle
If the window handle of your upvc is damaged, don’t panic. Replacing a window handle made from upvc is a fairly simple job and can be accomplished in just a few steps.
No matter if you have an in-line or a cranked window handle, they all have an elongated spindle that extends from the back plate. The spindle is placed into the locking device.
Identify the lock type and handle
Over time window handles or locks may be damaged and lose their functionality. The good thing is that this can often be remedied without replacing the entire uPVC window unit. The first thing you should do is determine the kind and size of the lock and handle. This will help you determine the replacement parts you require.
Identifying the kind of handle can be identified by looking at the handle’s base. There is an anchoring screw or pin that holds the handle to its base. If the screw is missing it could indicate that the handle is separated from the base. If the handle has broken internally and is no longer able to grip the spindle, this can be a sign that it is in need of replacing.
There are many uPVC handles however the Espag handle is the most well-known. They are usually fixed with two bolts and the spindle is connected to the locking mechanism of the frame of the window. These handles are typically used on uPVC tilt and turn windows.
Another type of uPVC window handle is the Cockspur handle. They are similar to the Espag handle, but they are a little further from the frame. These handles are generally used on older uPVC window frames.
Venetian window handles are another alternative. They are similar to Espag handles but have a flat bottom which allows them be installed in a flush position with the frame. These handles are a great option for homeowners who are looking for an elegant handle that will blend with their uPVC frames. They are available in a variety of colours that will match any style.
Measure the spindle
Before ordering a new handle, it’s crucial to understand how the original is attached. This will determine if it’s too tight or loose, and if it’s able to fit inside the window frame. This can be accomplished by identifying the handle’s type and measuring the spindle. The spindle is the steel shaft that connects the handle to the lock in the window frame. It’s available in various sizes and the current industry standard being 8mm. Older handles could have 9mm of cross-section, therefore you’ll need to take measurements of your old handle to ensure that you have the correct size replacement.
There are several types of window handles, however the most popular are inline Espagnolette and the cockspur handle. These handles are used to operate a locking system in the window. They utilize shootbolt rods to lock the window when it is closed. They are held in place with pins or screws based on the type of handle you have.
You can find replacement handles for windows made of upvc online and in a lot of DIY stores. They come in a range of finishes and are suitable for both new and replacement windows. They can also be key-locking, or fire-escape non-locking for additional security.
To take off your old handle simply open the door and loosen the screws that secure it. Place the screws in a container to protect them from damage. After the screws have been removed, carefully remove the handle. Find the distance from the base of the spindle to its tip. This will give you the necessary information to purchase the right replacement. The spindle of the handle is the steel shaft connecting it to the gearbox that locks the window frame.
Take off the handle from the old one.
The replacement of a uPVC window handle is an easy task and usually takes no more than five minutes with the right tools. The first thing you need to do is identify the size and type of the lock or handle. This will help you determine the best replacement. After that, weighing the spindle will ensure that the new handle is a perfect fit. In the end, you’ll need remove the old handle and replace it with the new one.
The majority of uPVC handles are inline Espagnolette handles, with an integral spindle that slots into the window’s locking mechanism. These are generally easy to remove, but you may require force to remove them if they’re stuck. The handle is usually held in place by two screws that you can remove by using the help of a screwdriver. Depending on the kind of handle you have, you may also need to remove the pins that hold it in the position.
After the screws have been removed, you can pull off the old handle. If the handle is unlocked and the top of the baseplate will be visible. This will reveal two additional screws that can be removed. There’s also a small silver or other colour sticker that needs to be removed if in place.
It is now possible to screw in the new handle using the screws from the old handle. Make sure that the handle is in an unlocked or open position, and then align the screw holes to the holes on the window. After you’ve done this you can replace the caps on the screws. Test the new handle. The replacement of a uPVC window could be a simple and quick task, but it’s crucial to make sure you complete it in a proper manner.
Replace the handle with the new one.
It’s time for you to install your new handle if you have successfully removed the old one from the frame. Begin by locating and taking off the screw covers using your screwdriver. Once removed, place them in a secure place and move on to the next step.
Next, put the new spindle in the handle by aligning it with the hole already in place and screwing it into. Be sure to align the holes in the handle with holes in the window frame and use a screw that is of the same length as the one used before, or it could cause the handle to not being secure.
The uPVC Espag handle is equipped with a spindle of 7mm square that rotates the lock mechanism that is mounted on the window. This type of handle is utilized in most modern uPVC Windows. uPVC Cockspur handles (also called Cotswold handles) come with long noses that lock over the frame’s outer or transom bar cross member. They are often found in older windows made of uPVC.
After the new handle is in place, it’s important to verify that it functions correctly by locking and unlocking the window several times. If everything is in order the new uPVC window handle should be securely attached and operating smoothly. If not, the steps listed above will allow you to identify any issues and fix it quickly. Bridgewater Glass can help you in the event of problems with your uPVC handles or other home improvement that is glazed. Our glaziers are able to repair or replace upvc window Handle various window frames and handles. This makes us a great option for double-glazing.
Test the new handle
Over time, uPVC handles can become damaged and worn out. This can make them less secure and less effective and therefore it is essential to replace them as soon as you can. It’s also a good option to consider when you upgrade your windows. Changing your lock mechanism and handle will ensure the integrity of your new windows.
When it is about uPVC window handles, there are many different styles. Some are secured with pins or screws, while others feature blades that fit into the lock mechanism. Each type has its own method of replacement, and it is important to know which type you’ve got before you begin working on it.
The most well-known kind of window handle is the espag. They’re typically used on newer uPVC Windows. These handles have a spindle that extends from the handle to the lock gearbox and when you open the window, it activates the locking mechanism. They are also easy to take off, but you should be careful not to damage the mechanism or the handle when taking them off.
Cockspur window replacement handles are a popular choice for uPVC windows. The locking mechanism is activated when the window is closed or tilted. A spur hooks onto the striker plates that are wedge-shaped on the frame. This type of handle is more difficult to fix than other kinds, but it’s still a good choice for replace Upvc window handle most homes.
Venetian window handles are secured by two bolts and feature a slim projection from the frame, which is not the case with the Espag handle. They’re ideal if you want an elegant flush handle that blends in with your uPVC windows. These are perfect for commercial and residential properties.