How to Replace a UPVC Window Handle
Don’t panic when your upvc handle has become broken. Replacing a window handle made of upvc is an easy task and can be accomplished in a matter of a few steps.
Whether you are using a cranked or an in-line espagnolette window handle, they all have a square spindle bar that extends out from the back plate and is inserted into the locking mechanism.
Find out the type and the size of the lock and handle
Over time, window handles and locks could become damaged or lose their function. It is possible to fix this problem without having to replace the entire uPVC unit. The first thing to do is determine the kind and size of your handle and lock. This will allow you to determine the replacement parts you need.
You can identify the kind of handle by examining the base. A screw or pin will secure the handle to its base. If the screw is not present it could be a sign that the handle has broken off from its base section. If the handle has broken internally and no longer grips onto the spindle, this can also mean that it needs replacement.
There are many different kinds of uPVC window handles, but the most common is the Espag handle. They are usually fixed with two bolts and have spindles that are connected to the lock mechanism in the frame of the window. These handles are commonly used on tilt and turn uPVC windows.
Cockspur handles are another type of uPVC handle. Similar to the Espag handle, however they are a little further from the frame. These handles are usually used on older uPVC window frames.
Venetian window handles are a different option. They are similar to Espag handles, but they have a flat bottom that allows them to be installed flush with the frame. They are an excellent choice for homeowners who are looking for an elegant, stylish handle that will blend in with their uPVC window replacement near me frames. The handles are available in a variety of colors that can be matched to any style.
Find the spindle’s measurement.
Before you purchase a new handle, it’s crucial to understand how the original handle is attached. This will tell you how tight or loose it is and if it will fit correctly into the window frame. You can do this by identifying what kind of handle you own and measuring the spindle length. The spindle is the steel shaft that connects the handle to the lock in the window frame. It’s available in different sizes with the current industry standard being 8mm. Older handles could have a cross-section of 9mm, therefore it’s essential to measure the old one to ensure you get the correct size replacement.
There are many kinds of window handles, Replace Upvc Window Handle however the most popular are inline Espagnolette and the cockspur handle. They operate with a locking mechanism inside the window, using shootbolt rods that lock the window when it’s closed. They are held in place with pins or screws based on the type of handle you’ve got.
You can buy replacement upvc handles on the internet or at most DIY stores. They are available in a variety of finishes and are suitable for new or replacement windows. For extra security, they can be either key-locking or non-locking fire-escape.
To remove your old handle, open the door and loosen the screws that hold it in place. Be careful not to damage the screws, and keep them safe in a container for later use. Once the screws have been removed, carefully pull out the handle and measure from the base to the top of the spindle. This will give you the necessary information to purchase the right replacement. The spindle of the handle is the shaft of steel that connects it to the lock gearbox inside the window frame.
Remove the handle that was previously used
The replacement of the uPVC window handle is an easy task and usually takes no more than five minutes if you have the right tools. The first thing to do is identify the kind and size of the handle or lock. This will help you choose the right replacement. After that, measuring the spindle will help ensure that the new handle is a suitable fit. In the end, you’ll need remove the old handle and replace upvc window handle (www.highclassps.com) it with the new one.
The majority of uPVC handles are inline Espagnolette handles, with central spindles that slot into the window’s locking mechanism. They are usually easy to take off, but you may need to use force to remove them if they’re stuck. The handle is typically held in place by two screws which can be removed using a screwdriver. Depending on the type of handle, you may also need to remove the pins that hold it in the position.
Once the screws are removed, you can pull off the handle that was previously attached. The top of the base plate will be visible when the handle is in the open position, showing two screws you can unscrew. There’s also a small silver or other colour sticker that has to be removed if it’s in place.
Utilizing the screws from the handle, you are now able to screw the new handle into the appropriate position. Make sure the handle is in an open or locked position, then align the screw holes with the holes on the window. After you have done this, replace the screw caps. Test the new handle. It’s easy to change the uPVC, however you need to do it correctly.
Fit the new handle
It’s time to install your new handle if you have successfully removed the old one from the frame. Begin by locating and removing the screws with your screwdriver. Once removed, place them in a secure place and move on to the next step.
Then screw the spindle in by aligning it with the hole. Make sure that the holes on the handle with the ones in the window frame. Use a screw that is the same size as the previous one.
uPVC Espag handles come with a square 7mm spindle that rotates the lock mechanism attached to the window. This kind of handle can be found in most modern uPVC windows. uPVC Cockspur (also known as the name Cotswold) handles feature an extended, curving nose that locks onto the frame’s outer or cross member of the transom bar. They are typically found on older uPVC windows.
It is important to lock and unlock the window several times after the handle has been installed. If everything goes according to plan, the new uPVC handle should be properly attached and running smoothly. If not, the above steps will help you identify any problems and get it fixed quickly. If you are struggling with your uPVC handle or any other glazed home improvement issues don’t hesitate to call us at Bridgewater Glass for professional assistance. Our glaziers are certified to repair or replace various window handles and frames, making us an excellent option for your double glazing needs.
Test the new handle
Over time, uPVC handles become damaged and worn out. This can make them less secure and effective, so it’s important to replace them as soon as possible. It’s also a good option to consider when you upgrade your windows. Changing your handle and locking mechanism will help maintain the integrity of your new windows.
There are a variety of uPVC window handles. Some are secured with pins or screws, while others have blades that slide into the lock mechanism. Each type has its own method of replacement, therefore it is important to know which kind you have before working on it.
Espag window handles are the most common type, and are usually found on the latest uPVC windows. These handles have a spindle that extends from the handle to the lock gearbox and when you open the window it triggers the locking mechanism. They are also easy to take off however, you must be careful not to harm the mechanism or the handle while doing so.
Cockspur window handles are a popular option for uPVC windows. They’re fixed by a spur that hooks onto a wedge-shaped striker plate on the frame. When you close or tilt the window, it activates the locking mechanism. This kind of handle may be more difficult to fix than others, but is an excellent choice for the majority of homes.
Venetian handles are joined to the frame using two bolts, and they have a low projection on the frame. This differs from the Espag handle. They’re great if you want an flush handle that blends with your uPVC windows. These are a great option for commercial and residential properties.