How to Replace Upvc Window Handle a UPVC Window Handle
If the window handle of your upvc is damaged, don’t be concerned. Replacing the handle of upvc on windows is a straightforward task that can be done in a couple of simple steps.
No matter if you have a cranked or in-line espagnolette style window handle, all of them feature a square spindle that extends from the back plate and is inserted into the locking mechanism.
Identify the type of lock and handle
Over time, window handles and locks can get damaged or Replace Upvc Window Handle lose function. The good thing is that this can often be repaired without replacing the entire uPVC window unit. One of the first things to do is determine the type of lock and handle you have because this will help determine the parts will be required for replacement.
Identifying the kind of handle can be identified by looking at the handle’s base. There is an anchoring screw or pin that holds the handle to its base. If the screw is not present it could be a sign that the handle has broken off from its base section. If the handle has been split in the middle and is no longer gripping the spindle, this could be a sign that it is in need of replacement.
There are many uPVC handles that are available, but the Espag handle is the most well-known. They are typically fixed using two bolts and the spindle works with the locking mechanism of the frame of the window. These handles are typically used on tilt and turn uPVC windows.
Cockspur handles are another type of uPVC handle. They’re similar to Espag handles, but have lower projections from the frame. These handles are generally used on older uPVC windows.
Additionally, there are Venetian window handles that are similar to the Espag handle but they have an elongated base that allows them to be positioned in a flush position with the frame. They are a great option for homeowners who want a stylish, elegant handle that will blend in with their uPVC window frames. The handles are also available in a wide variety of colors to match any decor.
Measure the spindle
Before purchasing a new handle, it’s crucial to understand how the original is connected. This will tell you how it is tight or loose and whether it will fit correctly into the window frame. This can be accomplished by identifying the handle’s type and determining the spindle’s measurement. The spindle is a steel shaft that connects your handle to the lock inside the window frame. It’s available in a variety of sizes and the current industry standard being 8mm. Older handles could have a cross-section of 9mm, so you’ll have to measure your old handle to make sure you get the right size replacement.
There are various kinds of window handles. The most common are the inline Espagnolette handles and Cockspur handles. These handles are used to operate a locking mechanism in the window. They use shootbolt rods to lock the window after it has been shut. They are secured by pins or screws depending on the kind of handle you have.
You can find replacement handles for windows made of upvc on the internet and in many DIY stores. They are available in various finishes and are suitable for new or replacement windows. For extra security they can be key-locking or a non-locking fire escape.
To remove your old handle open the window and unscrew the screws that secure it. Place the screws in a container to avoid damage. After the screws are removed, remove them carefully from the handle. Measure the distance from the base of the spindle to its end. This will give you the necessary information to purchase the right replacement. The spindle of the handle is the iron shaft connecting it to the lock gearbox in the window frame.
Remove the old handle
Switching the handle of a uPVC handle is a simple job that takes less than five minutes, if you have the proper tools. The first thing you need to do is identify the size and type of the lock or handle. This will help you determine the best replacement. After that, weighing the spindle will make sure that the new handle is a perfect for the job. Then, you’ll have to remove the old handle and replace it with the new one.
Most uPVC handles are inline Espagnolette handles, which are equipped with central spindles that slot into the locking mechanism of the window. They are usually easy to remove, but you may need to use force when they are stuck. The handle is usually held in place by two screws which can be removed with a screwdriver. It is also possible to remove pins based on the type of handle.
After the screws have been removed, you can pull off the handle that was previously attached. When the handle is open, the top of the baseplate should be visible. It will reveal two screws that can be removed. If the sticker is still on, you will need to remove it.
You can now put in the new handle using the screws from the previous handle. Make sure that the screw holes are aligned on the window to the holes in the handle. After you’ve done this you can put on the caps on the screws and then test the new handle to make sure that it is working properly. Changing a uPVC window can be a simple and quick job, but it’s important to make sure you do it correctly.
Install the new handle
It’s time to install your new handle if you’ve successfully removed the old one from the frame. Start by locating and removing the screw covers using your screwdriver. Once they are removed, put them in a safe location and proceed to the next step.
Next, place the new spindle inside the handle by aligning it with the hole in the handle and screwing it in. Make sure that the holes on the handle with the ones in the window frame. Make use of a screw of the same size as the previous one.
uPVC Espag handles come with a square 7mm spindle that rotates the lock mechanism attached to the window. This type of handle can be commonly found in modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) come with an extended nose that locks over the frame’s outer edge or transom bar cross members and are often found in older windows made of uPVC.
Once the new handle has been put installed, it is important to ensure that it operates correctly by locking and unlocking the window several times. If everything goes to plan then your new uPVC window handle should be properly attached and running smoothly. If you have any problems, these steps will help you determine the cause and fix it swiftly. Bridgewater Glass can help you when you’re experiencing issues with your uPVC handles or any other home improvement that is glazed. Our glaziers are certified to repair or replace a variety of window handles and frames which makes us a great choice for your double-glazing needs.
Test the new handle
Over time, the handles of uPVC can become damaged and worn out. It can make them less secure and effective which is why it’s important to replace window handles them as soon as you can. It’s also a good thing to do when upgrading your windows. Changing your handle and locking mechanism will ensure your new windows’ integrity.
There are many different styles of uPVC window handles. Some are fixed by screws or pins, while others have blades that slot into the lock mechanism. Each type has a distinct method of replacing it, and you’ll need to know which type you have.
Espag window handles are the most well-known kind, and Replace Upvc Window Handle are typically found on newer uPVC windows. These handles have a spindle that extends out from the handle and into the lock gearbox and when you open the window it activates the locking mechanism. These handles are also easy to remove. However, you must be cautious not to damage the mechanism or the handle.
Cockspur handles are another alternative to uPVC window handles. They’re held with a spur that hooks onto an elongated striker plate that is attached to the frame, and when you close or tilt the window, it activates the locking mechanism. This kind of handle is more difficult to repair than other types, but it’s still a good choice for most homes.
Venetian handles are connected by two bolts, and they have a narrow projection on the frame. This is different from the Espag handle. They are ideal if you need an flush handle that blends with your uPVC windows. They are ideal for residential and commercial properties.