Ghost Immobiliser Installation
Install a ghost immobiliser on your vehicle to protect it from car thieves. Our TASSA-verified system protects against hacking, key cloning and vehicle immobiliser bypass.
The system is hidden within the wiring loom in your vehicle, so it is completely invisible to anyone who looks. It is operated by creating pin code push sequences that are activated by existing buttons on the steering wheel, door cards, and centre console.
No circuit cuts
A car is a precious asset that you put in hours of work to acquire, so it’s understandable why owners want to protect their vehicle from theft. However, traditional security systems such as alarms and wheel locks can easily be cut off or taken over by thieves. Ghost immobilisers, on the other hand is a highly efficient solution that is silent and isn’t easily recognized by modern day thieves.
Ghost immobilisers is also known as a hidden device is a device that connects to the data network of your vehicle’s CAN to turn off the engine. It does this without using key fobs or autowatch Ghost Immobiliser Fitting radio frequencies. It communicates with the ECU of your vehicle through buttons on the dash, steering wheel and door panels. This generates a unique pincode that is only available to you. The code can be changed at any time and can be as long as 20 digits in length, based on the style you prefer. It comes with an emergency code you can use in the event that you forget your PIN.
The ghost immobiliser is also beneficial to stop the relay box at your home from transferring the signal from your car key, which could unlock the doors and start your vehicle. It can also block high-tech methods to steal your vehicle, like OBD port hacking. The device is small and weatherproof, which means it’s difficult to see and even harder to tamper with.
Another advantage of the ghost immobiliser is that it can be put inside your car without permanent marks. This makes it perfect for those who intend to sell their vehicle in the near future. It’s also quicker and more simple to install compared to a factory-fitted unit.
The Autowatch Ghost, a groundbreaking new generation device, stops thefts from cars that are not connected to a vehicle’s CAN network and using the buttons to generate a unique PIN code. It is a devious system that can be put in place without removing wires and requires no additional key fobs. It can also be connected to the vehicle’s original ECU to prevent thieves from bypassing it by using an additional key or replacing the ECU with an “relay”. This system is TASSA certified and is linked to an International Security Register, allowing owners to have peace of mind knowing their vehicles are secure from theft.
No scanning with RF
You will want to protect your vehicle from theft if have spent an enormous amount of money and effort to customize it. Installing an immobiliser is one of the most effective ways to avoid theft. It will prevent your vehicle from starting until you enter a unique code. You can create a 20-digit PIN using the buttons on your dashboard or steering wheel. This will ensure that only you are able to drive your vehicle. It is also possible to set up a service and valet mode that allows you to start your car temporarily without having to enter the PIN code. This will allow your technician to work on your car without you being there. This is a fantastic feature for those looking to cut down on time and make their life easier.
A ghost immobiliser is a new generation device that connects to the vehicle’s CAN data network and utilizes the buttons on the dashboard and steering wheel to programme a personalised PIN code. It is designed to be discrete, with no light or sound to signal it and can be placed anywhere on the vehicle, without impacting the look of your prized possession.
This stealthy gadget is approved by TASSA and can lower your insurance costs. It also comes with a tracking function, which can locate your vehicle even if it’s been stolen. This is especially useful if you own a rare expensive car which you’ve invested time and effort to customize.
The Autowatch Ghost can be used together with an iPhone app to enable you to remotely start your vehicle in the event that you forget your PIN or are not able to access the vehicle due to a reason. This feature is perfect if you need to pick up the kids or go on errands, but don’t want to put yourself at risk by letting the safety of someone else driving your car. This feature is helpful in the event that you need to bring your car in for service or repair.
Another advantage of the Ghost is that it doesn’t transmit or detect radio frequency signals, which makes it undetectable to thieves who use RF scanning or code technology to capture codes. It can also safeguard your vehicle from key copying, ECU swapping and other typical methods of theft.
No key to cloning
Ghost immobilisers can be an excellent way to safeguard expensive cars and stop key copying. They prevent your car from starting unless an additional PIN code is entered in conjunction with the normal key fob. This makes it very difficult for thieves to steal the vehicle, and may even discourage them from trying. This is a great idea if your vehicle has been heavily modified or is a rare model.
These immobilisers are connected to the vehicle’s CAN data network onboard and are completely hidden, which means that their presence isn’t visible. It is also impossible for a burglar to identify the device using radio frequency scanning or code grabbing technology. This means that a burglar would have to spend more time to take your vehicle.
To bypass the system a thief must be aware of the pin code and the location of the Ghost. The pin code is unique to you and can change it as many times as you need to. The pin code is easy to remember, but mathematically impossible for anyone else to understand. The engineer will also have provided an emergency pin code in the event that you forget the pin.
The Ghost CAN bus immobiliser is weatherproof and easily installed in any area of your vehicle. It works with all vehicles and fully customisable to match the style of your car. It is also simple to use and affordable. You can even transfer the device to a different vehicle if you switch vehicles in the course of ownership, provided that the new vehicle is compatible with it.
The immobiliser for the CAN bus is compatible with many other security features. It can, for example, detect damage to the vehicle and notify the owner. It could also shut down the engine if it senses that the vehicle has been tampered with. The system will safeguard your vehicle from hacking as well as key duplication. It can also detect vibrations or contact with the vehicle. It can also alert the owner if the vehicle is moved.
No OBD port hacking
Ghost is an immobiliser that is hidden and connected to the CAN data network of your vehicle which stops thieves from hacking into your car to disable the alarm, deactivate the key fob and code new keys. This technology is a significant improvement on traditional methods used by thieves in the past to take your vehicle. The CAN data network ensures that the system won’t be affected by disconnecting or changing your battery.
The Autowatch Ghost is the first CAN bus immobiliser aftermarket in the world, protects against key-cloning, hacking, and replica car theft. It works without LED indications or key-fobs, instead leveraging the buttons on your steering wheel or centre console, as well as the door panels to allow you to create a unique PIN code sequence (up to 20 button presses) that must be entered prior to when you can drive your car away.
Modern thieves can employ diagnostics to find circuit breakages in your vehicle. They can bypass immobilisers that require a large amount of wiring or are integrated into the wiring. The Ghost is weatherproof, doesn’t require additional wiring, and can’t be identified by diagnostic tools that are professional. It can be even installed on vehicles with anti-theft equipment.
Another major benefit of the Ghost immobiliser is that your vehicle is only able to be started by a person who knows the PIN code and has physical access to your vehicle. This is an advantage over traditional security systems which can be bypassed by simple cable tampering or a screwdriver.
You can easily reset your PIN if forget it using the emergency PIN override feature of a computer or mobile phone. This is useful if you want to start your vehicle after leaving it in a garage, or with the valet parking service.
The Autowatch Ghost Immobiliser Fitting (Https://Franks-Hovgaard-3.Blogbright.Net/The-Hidden-Secrets-Of-Autowatch-Ghost-2-Immobiliser) Ghost 2 has been certified for insurance by TASSA and can be installed by our authorised installers. It has the QR fingerprint system to allow components to be identified, which allows the return of stolen components in the event of their being discovered, and can also be set to’service mode’ which allows the engine to start when the vehicle is in a garage or using valet parking however you will need to enter your PIN code to exit the vehicle again.