How to Install Ghost Immobiliser
The Ghost immobiliser, a groundbreaking product, safeguards your vehicle against key-cloning and ECU swapping. It connects to the vehicles data network in CAN and is hidden within existing buttons on your dashboard and steering wheel. It is completely silent, and does not require any radio signals or LEDs.
The technology is also undetectable to thieves who employ modern methods, such as codes stealing or RF scanning. It’s a small cost to pay to protect your pride.
Easy to install
While standard vehicle immobilisers stop thieves from starting your car if you don’t have the correct key or key fob, a ghost immobiliser is an electronic device that takes it further. It has systems that prevent key cloning as well as device-spoofing and jamming of signals, which are methods often used to steal vehicles with standard immobilisers. It also lets you create a pin-code that is tough to break.
The system is connected to your vehicle’s onboard CAN (Controller Area Network) data network, and programmed to safeguard it with an entire unique PIN code of your choice. The CAN Immobiliser will block the engine even if the keys are in the ignition. It will not start until the correct code has been entered. The system is completely undetectable. There are no indicators on the LEDs or sounds to notify you to its presence. It doesn’t transmit radio frequencies, so it is impossible to use RF scanners or code-grabbing techniques.
The Ghost CAN Immobiliser is disabled using the companion app for your smartphone. This makes it simple to transfer your vehicle to a different one if you decide to sell or trade in your old car. It’s also TASSA approved and can help reduce your insurance costs. This is a crucial factor to consider when selecting the right vehicle security system.
Ghost immobilisers aren’t visible and is integrated in the bodywork of the vehicle. This makes it difficult to remove. A ghost immobiliser can also be more difficult to disable than traditional security devices like beacons and alarms.
The ghost immobiliser is compatible with a variety of vehicles and comes with a variety of additional features. This includes an emergency entry system that lets you enter a passcode using the app on your smartphone that will disable the immobiliser and How to Install Ghost Immobiliser permit you to drive your vehicle back to home. There’s also the valet mode, which lets you hand over your vehicle to a valet service or mechanic without disarming it. It can also be connected with an GPS tracker to help locate your vehicle after it has stolen.
Easy to deactivate
In a world where car theft is rife it’s essential to find ways to protect your car’s pride and joy. Ghost immobilisers are one of the most effective ways to prevent thieves from stealing your car. The system is operated by connecting to the CAN network in your car and programming a specific PIN sequence which must be entered in order for the engine to start. This is done by using buttons on the steering, centre console or doors. A customized sequence of up 20 inputs is utilized which is extremely difficult to crack.
Unlike traditional security systems that utilize LED indicators or key fobs and key fobs, the ghost immobiliser utilizes the CAN system in your Mercedes to connect to the ECU via the data bus, making it unusable without removing any parts or cutting wires. The device is not detectable by modern diagnostics and will not interfere with radio frequencies used by thieves to locate your vehicle.
Another advantage of a ghost immobiliser is that it stops key cloning and ECU swapping. The ghost immobiliser stops thieves from using this technique to steal vehicles by requiring a PIN code to start the engine. The ghost immobiliser can stop thieves from acquiring new key fobs, or even replacing the ECU. It’s designed to work with existing Mercedes keys.
This technology can be used in conjunction with other security measures, such as GPS trackers. This technology can help you recover your car in the event of theft but it doesn’t stop thieves from taking it away in the first place. Contrary to that the ghost immobiliser could, which is a much better option for those who own expensive cars.
A ghost immobiliser can also protect your vehicle’s price at resales by preventing thieves from selling your vehicle on the black market. This is especially crucial for high-end cars, How to Install Ghost Immobiliser as they can often lose their resale value when they have been taken away in the past. Ghost immobilisers do not leave any evidence of its installation, which means it won’t affect the aesthetics or harm the engine in the event it is accidentally removed.
Easy to transfer to a new car
If you decide to sell your vehicle, the Ghost can be removed and transferred to a new vehicle which makes it one of the most flexible security devices on the market. The ghost immobiliser installation uses the CAN data network to communicate with the ECU and is completely silent. This means that it is not detected or monitored for a signal. This is an important feature for those who want to safeguard their vehicles from theft.
The Autowatch Ghost immobiliser is a revolutionary device that helps combat theft of vehicles in the modern age. It prevents key cloning and other shady methods used by professional thieves to steal cars. The system arms within 3 or 30 seconds (depending on the model) after the ignition is switched off and remains arming until the owner enters into a PIN sequence (4-20 button clicks, based on the model). If you have the optional gear-box lock option, it will also prevent the vehicle from moving while the engine is running.
This is the first security product that was designed how to install ghost immobiliser fight the most recent methods of keyless vehicle theft. Unlike other immobilisers that use a radio frequency, the GHOST is able to connect to your car’s ECU using the CAN data network and is completely silent. This makes it untraceable to thieves, who are looking for the distinctive LED indicators or frequencies that could give away other immobilisers systems.
It also cannot be detected by sophisticated RF scanning or code-grabbing technology that can determine what kind of security system is in your car. It is also impossible to disable since it doesn’t require keyfobs or radio frequencies. The GHOST is also compatible with a variety of vehicles and includes an emergency backup code to make it more secure.
The GHOST can be used together with a tracker to stop the vehicle from being relocated if it is stolen. This can be a very useful tool for those who have invested in customizing or purchasing expensive or rare vehicles. In actual fact, it’s becoming more and more common for insurance companies to require a ghost immobiliser on all vehicles with keyless entry. This can lead to lower monthly premiums.
It is simple to change the PIN code
The Ghost immobiliser Autowatch’s Ghost immobiliser Autowatch is an innovative new device that protects against key-cloning or hacking. It is connected to the CAN network in your vehicle and allows you to design an unique disarm sequence. This must be entered to allow the vehicle to be driven again. This is similar to the way PIN codes work for your credit card. You can change your pin at anytime.
Installed discreetly, the ghost system leaves no visible marks on your vehicle. This makes it harder for vandals and thieves to detect and tamper. It can be transferred to another vehicle without any problems. This is a huge advantage for anyone who is planning to sell their vehicle in the near future.
In a few easy steps, you can modify the PIN for a ghost immobiliser. This is a straightforward process that should only take about a few minutes. It is important to first ensure the vehicle is warm and the battery is fully charged. You should also be aware that this procedure will disable service mode, which means you must enter the PIN before using the vehicle again.
After you’ve changed your PIN code, make sure to test it in a safe environment. This is an important step to ensure that the device is functioning properly. Switch on the ignition, and then press a few keys on the steering, doors, or the centre console. The ghost will display a series LEDs to indicate the correct sequence of disarming. You can test the system by putting it into service mode, which will stop the engine from starting.
Ghost immobilisers are a good option for vehicles that are often abandoned. It is designed to work with all kinds of vehicles, such as motorhomes, vans and riding lawnmowers. It provides a range of other features, such as mechanical protection and anti-hijacking tools. This technology is a great addition to your vehicle’s security and can reduce your insurance premiums. A lot of insurance companies require this gadget to be fitted on keyless entry vehicles to help reduce the growing risk of theft.