Autowatch Ghost II Immobiliser Installation
Ghost immobilisers are among the most advanced features in vehicle security. They are revolutionary in that they protect your vehicle from key cloning and hacking.
The system has a unique disarm sequence, requiring the correct PIN code to start your car. This is accomplished by pressing the buttons on your dashboard or steering wheel.
TASSA Approved
The new TASSA verified Ghost-II CAN immobiliser from Autowatch is a revolutionary device that was designed to fight recent crime trends, including key cloning and hacking. This innovative system connects directly to the CAN network of your vehicle, preventing it from being turned on or driven if you don’t have the right code. The system is completely undetectable and does not utilize radio frequencies or an electronic key fob, rather it allows you to create a unique PIN sequence through existing buttons in your vehicle, like the ones on your steering wheel or dashboard, which you can change at anytime. You can create a PIN up to 20 times long to ensure maximum security and a secure emergency code is available too.
The system works by communicating with the vehicles CAN data network in order to detect when a specific PIN has been entered. This is then sent to the vehicle, which disables engine and ignition and shuts down crucial components like the starter motor and the fuel pump. The system also provides valet mode, allowing you to deactivate the system and prevent your car from being driven by valets or service center personnel without the correct keys.
Contrary to conventional immobiliser relays that can be deactivated using readily available professional diagnostic tools and tools, the Ghost device makes use of the onboard data network to communicate with the ECU and cannot be tampered with. It’s a sealed unit so it is not possible to monitor the circuits, making it nearly impossible for thieves to hear the tell-tale clicking sound that traditional immobiliser relays make.
This technology is also not susceptible to jamming devices utilized by high-tech thieves. Furthermore, since it operates on the CAN data network, it’s not detectable by other diagnostic tools. This makes it the perfect anti-theft solution for any modern vehicle.
After you’ve scheduled your TASSA approved ghost 2 immobiliser installation (go to this site) we will arrange an appointment time and date to visit your home or business to complete the installation. We’ll walk through a thorough demonstration with you. We’ll will then provide you with an owner manual, an emergency card and two Autowatch window stickers as well as an installation certificate.
Insurance Approved
The Ghost is a security gadget that is installed aftermarket and protects you from the types of thieves who are interested in stealing vehicles. It works by preventing the engine from running until the appropriate sequence of buttons is hit. The only person to know the sequence is you. If your vehicle is stolen and the thieves are able to start it, and will leave your vehicle in peace out of fear. The ghost also comes with a ‘silent mode’, that will shut down the vehicle if it is not being used and Ghost 2 Immobiliser installation can be turned off by the push of a button.
The system is fully TASSA (Tracker and Aftermarket security systems association) insurance-approved, which means it will be recognised by some insurance companies as an additional security measure on your vehicle. It can be used in conjunction with other Thatcham approved security measures such as trackers to prevent your vehicle from being stolen and provides extra security.
In addition, the system communicates with your vehicle’s ECU via the CAN data circuit, which makes it undetectable to diagnostic tools and completely quiet. This means that thieves cannot simply add a new key or change the ECU to bypass the Ghost. The system will only begin to start your car when you enter the correct pin code. This unique pin code is only available to you and is able to be changed at any time.
The Ghost is a discreet immobiliser that can be added to most vehicles without the need for wiring or the addition of aftermarket key fobs. It is directly linked to the vehicle’s CAN data network, and a PIN code is programed using the buttons on the dashboard and steering wheel. This code will then prevent the vehicle from starting unless the correct sequence is selected first. In the event that the code is guessed, there are secure emergency codes that can be reset via your mobile phone. In addition to this it is possible to use an easy-to-use app for iOS & Android that minimises the requirement to enter your pin every occasion, ensuring more security that is hassle-free.
Discreet
An immobiliser system, in contrast to a GPS tracker, which only aids you locate your car after it’s been stolen, stops the vehicle from ever being stolen in the first instance. It does this by stopping the engine from starting until it is given the correct code from the key fob or a smartphone app downloaded to it. This is the best method to stop wheel jacking as well as other kinds of theft since the criminal will have no choice but to leave the car unattended or risk being caught.
The ghost immobiliser, a small weatherproof device, is tucked away into the wiring harness of your car. It has a connection to the CAN data network, and is concealed so that thieves cannot find it or disarm it through simple wire cutting. The system also has the option of a service mode that can be turned on so that your garage can work on your vehicle without needing to know the passcode required for it to start.
After you’ve had the device attached to your vehicle you’ll be able arm and disarm it using your smartphone using its dedicated application. You can alter the PIN code whenever you’d like to ensure you are the only one who has access to your car. This is helpful when you are planning to sell your car in the near future in order to increase the resale price.
Another great feature of the Ghost immobiliser is that it’s subtle and leaves no marks on your internal body of your vehicle which makes it a great accessory to any vehicle. It’s simple to install, works silently and will not disrupt the other systems inside your car.
Many people are placing more emphasis on the appearance of their vehicles So having a discrete immobiliser can improve the look and feel of your car. This can be especially appealing to those who utilize their vehicles to transport expensive goods since it can stop potential thieves from targeting them. The ghost immobiliser works together with other anti-theft systems like trackers to offer unrivalled protection for your vehicle.
Low Maintenance
Ghost immobilisers function by connecting directly to the CAN data network. They are virtually undetectable, as they don’t utilize LED indicators or other key fobs. It doesn’t emit radio signals, and is silent, meaning that thieves won’t hear it. This device can be hidden in a variety of places (even under the floor mats) and is an excellent option for those who want to secure their vehicle without compromising on aesthetics.
This device prevents your car from starting until you enter the password that is unique to you. This is accomplished by pressing a combination of buttons on your dashboard and the steering wheels in a certain sequence. This will prevent thieves from cloning or hacking into your system, and prevent them from starting your vehicle.
Thieves could also try to increase your signal to gain access to your vehicle, ghost 2 immobiliser installation however the Ghost will be able to detect this and stop your vehicle from starting until input the correct disarming sequence. In contrast to other security systems which can be activated by entering the incorrect code, the Ghost will continue to block your vehicle from starting until you input the correct passcode.
The lamborghini ghost installer will remain in service mode until you put it back into “service” which is activated by pressing the same combination of buttons as you did to arm it, (this can happen when you visit your dealer to perform maintenance or warranty work). This is a security measure to ensure that it is not taken away by anyone who is not authorized and then rearmed and returned to service mode when required.
If you decide to switch vehicles in the course of ownership, it is possible to transfer the Ghost to the new vehicle provided the new vehicle is compatible. The most recent version of Ghost also comes with QR finger print stickers that connect to the International Security Register, meaning that should your Ghost is taken for parts, it can be traced back to you and your vehicle. This will deter thieves from stealing vehicles equipped with Ghost, as they know that they are protected and are less likely to be caught and convicted.