Replacement Upvc Window Handles
Most replacement upvc windows handles come with everything you require. However should you find that your old handle was fixed by pins or screws, they’ll need to be removed. Remove the’snap-in’ cover at the base of your handle.
The next step is to determine what kind of window and lock your new handle for It is essential!
Espag
Espag handles are a multipoint lock system that is installed on casement windows such as uPVC and double glazing made of wood. They feature seven millimetre square spindles that fits into the gearbox on a uPVC window and when the handle is turned, it opens with a series of locks that run around the perimeter of the window. Espag handles, also referred to as shootbolts, give more security than the single point lock that is found on older window frames.
They are available in a variety of different designs, including inline and cranked designs that can be used for either left or right hand operation. You can also find various ergonomically designed handles that are made to enhance both the feeling of the handle as well as how it looks on your windows.
If you are looking to replace your current uPVC window handle with an espag handle, you will need to identify the size of the spindle that is fitted and measure this from the base of the handle to ensure you purchase the correct replacement. This measurement is known as step height and will help you find the perfect uPVC handle for your home.
If you require to remove screws that hold the handle, use the screwdriver or pliers. Once you have done this then you must remove the handle from the frame by taking out the screws or pins that hold the spindle and then taking it away from the window replacement panes.
After removing the handle, you can open the locking mechanism in the frame of the windows and take out the cockspur block located next to the handle. This will allow the window to be opened. The replacement uPVC window handles you have purchased should be able to fit onto the wedge block of the cockspur and then into the handle spindle and allow the window glass replacement to open once again. It is recommended to replace the cockspur wedge block a new one whenever you replace your uPVC handle to ensure it is properly secured.
Cockspur
Cockspur handles are found on older uPVC or aluminium windows. The handle is closed and then turns into a wedge-shaped plastic catch. (Not to be confused with timber latches, which are also covered in this section.) These handles can be lockable or nonlockable. They are available in a variety of nose heights that can be adapted to the frame.
The handle locks using an thin spur (little triangle bit) pulling against a plastic wedge which is attached to the frame. They are usually one-way handles however a locking deadlock cylinder is a possibility to add security.
Similar to Espag handles, the replacement handles for cockspur handle are simple to put in place all you need is an additional set of screws (supplied) and the correct backset. The backset is measured from the baseplate to the underside nose of the handle. As a general rule Aluminium window frames typically use a 9mm backset while UPVC uses a 21mm. There are a variety of other options however, so it is crucial to measure the handle prior to buying the handle (see video below for how).
This kind of window handle can be changed by simply unscrewing the existing handle and removing the spindle, or in some cases, the entire handle. The replacement handle is then screwed in place using a pair pozidrivs screws. The pozidriv screws come in a brass or zinc finish to match the hardware and there is also the option of a self-locking version.
It is a simple to install replacement for the cockspur handle that is perfect for fixing or replacing old uPVC windows, they have a universal design which makes them suitable for all profiles and backsets. Each handle comes with three packers, each of different thicknesses. They are installed on the underside of handle noses and can be stacked to create backsets as small as 9mm or as big as 21mm. These handles are available in left and right-handed versions and in lockable and nonlockable versions. They also come in a variety nose heights.
Tilt and Turn
The most prestigious European window style of tilt and turn has been in use in Europe for a long time, however it’s just now beginning to gain popularity in the Americas. They combine the advantages of three window types into one – tilt, pivot, and in-swing. They are ideal for older homes since they provide more ventilation than standard windows.
When closed tilt and turn windows lock like windows that are fixed in normal fashion. But, by turning the handle 90° or 180@ (depending on the type of tilt and turn window) the sash can be opened inward and the window will be tilted in order to allow air circulation through the gap at the top of the frame. This is a great method to let air circulate without opening the large windows that could be dangerous.
If the handle is turned 90or 180 degrees the sash can be fully opened, much like doors. This allows complete air circulation, which is particularly useful in draughty rooms or houses where smoke and other odors can build up. This makes it easier to clean the glass’s outside since you can do it from inside your home. This is a task that often requires a lot of risk.
Tilt-and-turn windows are also very safe. They are difficult to open when they are locked in the closed position. They also feature double seals that stop rainwater from entering your home while in the tilted position or swing. This feature is especially useful for older homes where intruders tend to target windows which can be opened using side hinges.
Spade
There are several different types of handles that are able to be fitted on double-glazed windows made of upvc. The two main kinds are Espag handles and Cockspur handles. There’s also tilt and turn handles blade or spade handles and monkey tail handles. The type of handle you choose will depend upon your preferences as well as the kind of windows you have.
To select the right replacement upvc window handle, you need to know how your existing handle is attached to the frame. This is known as handing, and it is an important element to be aware of when shopping online. Some handle variations are not suitable for Replacement Upvc window handles all windows. Some handles, for instance, are angled, while others are straight and can be turned left or right. You should also be aware of what the spindle length is, which is the distance from the base of the handle to the top of the handle.
Another aspect to consider when choosing the right handle is determining whether your windows need a restrictor or not. They are typically used in high rise flats or commercial buildings, however they’re not required for the majority of homes. Also, consider step height which is the distance from the bottom of the screw plate to the nose of the handle.
Spade is a word that comes from Old English spadu or spaedu and has been translated in several languages, including German spaten and Low German Spathen. In the 1920s, during the Harlem Renaissance in New York City spade started to be used as a sexist term for black people. Since the time, the word has become an emblem of African American pride and heritage.
When replacing a Cadenza style handle, it’s crucial to select the correct size. The handles are available in both straight and angled designs that differ by only a few millimetres. The handle head is available in a variety of designs such as the T or D shapes. It is also possible to be left with handles.