Ghost Immobiliser Problems and Solutions
We spend years saving to purchase cars. It can be a very difficult experience when your joy and happiness is stolen.
If you have a ghost immobiliser fitted by a reputable fitter, such as Car Theft Solutions it can stop thieves from getting away in your car within a matter of minutes.
1. No Stop/Start
The Autowatch Ghost CAN Immobiliser was designed and developed to be one of the most effective security systems on the market. The system works by using buttons on the steering wheel, the centre console and pedals to input a pin code in the vehicle’s system. It will then disable the engine. This prevents the thief from stealing your car even having fob or keys.
The Ghost is equipped with security measures to guard against the device from being hacked by thieves or bypassed. This includes CAN bus blocking as well as cutting through the immobiliser. Together with an insurance approved marking system, the odds of your car being stolen are nearly nonexistent.
This system works in conjunction with the factory-installed immobiliser on your vehicle, to add a secondary layer of security. It blocks the criminal even if they have your remote or key, from getting your car started. This protects your resale and keeps your family and friends secure.
If your ghost has stopped working it can often be a sign of other issues that are not ghost immobiliser fitting related. To test this, switch to valet or service mode on your ghost 2 immobiliser fitting near me. This will disconnect your Ghost from the car and you will be able start the car. If you’re unable to do this, there may be a problem with your Ghost installation.
It is not recommended to try to eliminate ghosts on your own unless you have the necessary skills. This is because you are working with a complicated and delicate system that directly controls your engine. This could cause damage if handled incorrectly and can be extremely dangerous. We suggest that you contact the installer for assistance.
2. No ignition
Modern cars use immobilisers that stop your vehicle from starting if the key doesn’t match the one that is programmed into it. This works by transmitting a transponder code from the key to the immobiliser which then checks it against the ones stored inside it. If the codes are in agreement, the engine is able to start. However, a variety of factors could cause this system to fail, including a lost or stolen key and a damaged or non-coded transponder, or electrical issues such as broken immobiliser antenna wiring, which typically surrounds the ignition cylinder. It’s also possible that the codes are being misinterpreted by multiple keys, like having a spare key, or an automobile with two transponders within the same key.
If the immobiliser doesn’t function properly, it could be difficult to start your vehicle. This creates the impression that the system is not working and they can take off with the joy and excitement of the owner. This is a great investment for any car owner and especially for those who own prestige vehicles which can be hard to sell after having been damaged or stolen.
The ghost immobiliser is hidden in almost any part of your vehicle which makes it virtually unnoticeable by car thieves. It works by using the buttons on your steering wheel, doors or the centre console to create an individual PIN code that you can identify which ensures you are the only person who is able to drive the vehicle. It doesn’t have LED indicators and is quiet so thieves won’t even know it’s there. The Ghost is TASSA approved and Insurance Approved. This means it can be installed by an approved installer and help to protect your pride and joy from key cloning and hacking.
3. No engine start
It’s not surprising that many are looking to provide an additional layer of security. With car thefts on the rise, and keyless entry vehicles being a prime threat to thieves, it’s no surprise that people want to add an extra layer of security. One of the most effective ways to accomplish this is to install an immobiliser ghost. This groundbreaking device shields your joy and pride from damage and theft by using the latest and most advanced technologies.
In contrast to traditional systems that rely on LEDs and key fobs, the Ghost is a new generation security system that uses an individual pin code that only you can identify to enable you to start your car. The device is programmed to secure your vehicle with buttons on the dashboard and steering wheel. The device will not permit the engine to start until your pin code is entered first. This is done completely silently and there are no clicks as with other systems. This means that it would be almost impossible for thieves to detect.
If needed it can also disable stop/start eco mode. This is done differently for each vehicle, but it is typically similar to the system is stalling or locking the gearbox in P. This can be done with or without the anti-hijack activation.
Ghost immobilisers are extremely efficient in securing your vehicle and will work with any key, or even a spare. It can be used to stop all types of theft, including key cloning, hacking, and ECU swapping. It also helps to prevent vehicle damage through the detection of the sound of a vehicle and tampering. Ghost immobilisers can also safeguard the value of your vehicle by making it less attractive to thieves, so is certainly worth considering.
4. Keyless entry is not possible.
The last thing a car owner would like to experience is having their pride and joy stolen. It doesn’t matter if you’ve been saving for years for your vehicle or you’re simply the owner of a high-end car that you’re proud to display and dealing with a vehicle that’s stolen is a very depressing experience. Luckily, with the right security system in place, you can protect your vehicle from clever thieves.
Unlike wheel locks or Faraday bags, Ghost 2 immobilisers can be discreetly installed inside your vehicle (without damaging your vehicle) and will only allow your car to start if the unique pin code is properly entered. The pin code is selected by you and can be altered at any time you would like. The device is also different on each vehicle, so thieves won’t even know it’s even there.
Ghost II connects to your vehicle’s CAN system, and communicates via the CAN data loop. This means that Ghost II isn’t able to be detected by thieves using scanners using RF or code grabbing. It can’t be bypassed by introducing a new key or replacing the ECU as only the correct pin code will allow your Lexus to start.
Our TASSA-accredited Ghost 2 immobiliser has been accepted by insurance companies and will give peace of mind knowing that your vehicle is protected from contactless theft. Not only will this assist you in recovering any losses caused by theft, but it will also make it difficult for thieves to sell your car in the future, since they’ll know that it is equipped with an anti-theft security system installed. This could save you thousands of dollars in resales value.
5. No alarm
A ghost immobiliser is one that is technologically advanced and fitted to your vehicle to stop it from being stolen. It stops your vehicle from being stolen by preventing the engine from starting until you enter a pin-code sequence that you have mastered.
This is an excellent anti-theft device as unlike a car alarm or wheel lock, a ghost immobiliser cannot be removed or spoofed. It can also be used to jump start. If a thief attempts to steal your car with this method, he’ll find that the vehicle will not start and the driver will be forced to drive off without it.
Car theft has become more sophisticated, which means that technology has to improve to stop thieves from taking your pride and joy. It is essential to secure your car with a ghost-immobiliser. They’re not just affordable, but also extremely effective in protecting your vehicle.
They’re not noticeable and aren’t a lot of a deal therefore a burglar is unable to see them at all. The device can also be used in conjunction with a car tracking system, to ensure that you know where your vehicle is and Ghost immobiliser problems whether it’s secure.
The Ghost CAN immobiliser was the first aftermarket CAN bus lock. It was designed to protect against key cloning or hacking and key theft. It’s TASSA certified, which means that it’s safe. The device can be inserted inside your vehicle at a concealed location, works silently, has no radio signals, and is unnoticeable to the naked eye. The best part is that it costs less than a typical car alarm, and will do more to stop thieves from taking your car in the first place. This will give you peace of mind and make your car more secure than it has ever been.