Reasons Your Fiat 500 Key Fob Won’t Work
A fiat punto car key replacement 500 key fob is a great way to open the doors and fiat punto car key replacement begin the car. However, there are numerous reasons why the fob may stop working. These include a dead coin battery, water damage, receiver module problems, and interference.
This listing is for a NEW replacement fiat van key replacement Flip Key Remote – an exact replica of the Ilco brand that must be professionally programmed by a local automotive locksmith (click here for Locksmith Search). This remote includes lock, unlock and trunk buttons.
Dead Coin Battery
The most frequent reason that your 500 key fob doesn’t function is due to an inactive battery. Modern key fobs have a limited range of operation and must be within just a few inches of the vehicle to work. If you are far from your car and press the keyfob button, it won’t respond and display the message “Key Fob Not Detected”.
If this happens, simply replace the battery on your coin cell (Part number CR2032) by a new one from a reliable brand like Panasonic, Duracell, or Energizer. They can be found in your local hardware store or online.
After you’ve replaced the coin cell battery you can test it by standing close to your fiat car keys cut 500 and pressing the buttons. The car will flash its parking lights and the key fob should work the lock and unlock switches.
If the key fob won’t function after replacing the battery, it could be damaged by water, which prevents it from connecting to the receiver module inside your car. Water damage can happen in a variety of ways, such as simply splashing or submerging the key fob saltwater at the beach. If you believe your fob was exposed to water, you can place it in a rice bag to draw out the moisture. If this doesn’t work the fob might require reprogramming by a professional auto locksmith or dealer.
Water Damage
Water damage can occur if you immerse the fob into the ocean, or wash it in a machine. Saltwater can be particularly harmful to the circuit board of the fob which causes it to short out and eventually end up dying. Getting the fob wet is not an ideal idea but if you drop it into the water in a cup or don’t remember to take it out of your pocket before you run the washing machine Don’t give up hope.
First, remove the battery. Clean the electronic chip using isopropyl ethanol or a similar product and then dry it completely before replacing the battery. Check the fob to verify if it’s functioning. If the key still doesn’t work, it may have to be reprogrammed. This is usually handled by an auto locksmith or dealer.
If the key is a newer model and was not programmed to your vehicle It is likely that it needs to be replaced completely. A professional locksmith for automotive can carry out this simple task. The locksmith must cut the key to match the ignition on your vehicle. They’ll also have to reprogram the fob for the car’s system. This is a fast and cost-effective process that can usually be completed on the next day.
Receiver Module Issues
One of the simplest reasons why your 500 key fob might stop functioning is because it’s out of range. The remote typically has a range of 30 feet or less, and if it’s too far from your car, it will not respond to your commands. This can be fixed by moving closer to your vehicle until it begins responding.
If you’ve replaced your coin battery (commonly known as a “button” or “watch”) and your fob doesn’t function It could be because of an internal circuit board issue. Reprogramming your fob can resolve this issue. There are instructions on how to do this on the majority of automobiles by searching YouTube or reading the owner’s manual.
It’s possible that you need to replace the metal clips that keep the coin battery. If they loose tension it could hinder the coin battery from sitting properly, and this will result in the malfunction of your remote.
In rare instances it is possible that the fob will become desync’d with your vehicle due to software issues or hardware issues. You can fix this problem by visiting your local auto-locksmith or dealer to reprogram your key fob. In certain instances it may be necessary to reinstall the software in your body control module, too.
Interference
In addition to a dead battery on a coin The key fob may not be able to receive or transmit a signal due to interference. This could happen when the keyfob is located in close proximity to a radio transmitter, like a cellphone or radar detector. The key fob could not function due to a poor connection to the buttons, water damage or damage to the internal chips.
If the key fob has been unable to function for a while out of the blue, or after trying everything you can do at home to solve it e.g. You may have a faulty 500 receiver module after you’ve tried replacing the battery, reprogramming or using an alternative key fob. The receiver module is located under the dash and picks up the radio frequency signals from the key fob. It converts the signals into electronic commands which are then read by the vehicle.
There’s a quick and easy way to reset the 500’s internal system including the keyfob. Disconnect the 12 volt battery for about 15 minutes, by disconnecting the negative cable first then the positive cable. Reconnect the battery. This will clear any residual electrical charge, and then restart the computer of your car. This can help get your key fob to function again. If the issue persists, you should speak with an expert technician. They will be able to identify the root cause of any issues.