Ghost Immobiliser Installation
Add a ghost immobiliser your vehicle to protect it from car thieves. Our TASSA-certified system is safe from hacking, key cloning and vehicle immobiliser bypass.
The system is hidden within the wiring loom of your vehicle, so it’s completely invisible to anyone who sees it. It is created by generating the pin code push sequence that is pushed through existing buttons on the steering wheel doors, door cards, and the central console.
No circuit cuts
A car is a prized item that takes many years of effort to acquire, so it’s understandable why car owners would want to secure their vehicle against theft. Traditional security systems, such as alarms or wheel locks can be easily bypassed by thieves. Ghost immobilisers are extremely effective solution that works in a quiet manner and can’t be detected by modern thieves.
A ghost immobiliser is also known as a hidden device, is a device that communicates to your vehicle’s data network CAN to disable the engine. It does this without the use of key fobs or radio frequencies. It communicates with the vehicle’s ECU by using buttons on the steering wheel, dash and door panels, to create a unique pin code that only you are aware of. The code can be altered at any time, and can include up to 20 digits based on your preferences. It comes with an emergency code that you could use in the event of forgetting your PIN.
The ghost immobiliser could also be used to block a relay box from transferring the car key’s signal inside your home, which would unlock the doors and start the vehicle. It could even block advanced methods of stealing your car such as OBD port hacking. The device is small and weatherproof, which means it’s difficult to detect and is even more difficult to interfere with.
The ghost immobiliser has another advantage: it can be inserted into your vehicle without leaving any permanent marks. This makes it perfect for people who plan to sell their vehicle in the near future. It’s also a lot more efficient and less time-consuming to install than a factory-fitted system.
The autowatch ghost immobiliser installers near me immobiliser fitting; M.en.rohseoul.Com, Ghost is a groundbreaking next-generation device that blocks contactless stolen cars by connecting to the vehicle’s CAN data network and using the existing buttons to generate a unique PIN. This is a hidden system that can be put in place without severing any wires, and does not require additional key fobs. It can also be connected to the vehicle’s original ECU and prevents thieves from gaining access by using an additional key or replacing the ECU with a “relay”. This system has been verified by TASSA and is compatible with an International Security Register. Owners can rest assured, knowing that their vehicle is secured from theft.
No scanning by RF
If you’ve put lots of time and money into the customisation of your vehicle, you’ll want to protect it from theft. One method to do this is to install an immobiliser. It will prevent the engine from starting until you enter a unique PIN code. By using the buttons on your steering wheel and dashboard, you can create an apex of 20 digits in length that is only known to you, making sure that only you have access to your vehicle. It is also possible to set up a service or valet mode that will allow you to start your car for a short period without entering the PIN code. This allows the technician to work on your vehicle, without being present. This is a fantastic feature for those who want to cut down on time and make their lives simpler.
A ghost immobiliser, a new generation device connects to the CAN data network of your vehicle and uses buttons on the dashboard and the steering wheel to program a PIN code. It is designed to be discrete and has no LED indicator or noise to make it obvious and can be installed anywhere on your vehicle without disturbing the aesthetics of your prized possession.
This stealthy device is TASSA approved and could reduce your insurance costs. It also comes with a tracking function that allows you to locate your vehicle even if it has been stolen. This is especially useful for those who own a unique, expensive vehicle that you’ve spent a lot of effort customizing.
Autowatch Ghost, in conjunction with the iPhone app allows you to remotely start your car when you’ve lost your PIN code or are not able to enter your vehicle. This feature is perfect if you have to run errands or pick up your children and do not want to let someone else drive your vehicle. This feature is useful when you need to take your vehicle in to be repaired or serviced.
Another benefit of the Ghost is that it is unable to transmit or detect radio frequency signals, which makes it undetectable to thieves who use RF scanning or code grabbing technology. It can also safeguard your vehicle from key cloning, ECU swapping and other common methods of car theft.
No key cloning
Ghost immobilisers can be a great way to protect expensive cars and stop key duplicates. They stop your car from being started without a PIN code being entered in conjunction with the regular key fob. This makes it very difficult for thieves to steal the vehicle, and can deter them from attempting. This is a great idea if your vehicle has been heavily customized or if it is a rare model.
These immobilisers are linked to the vehicle’s CAN network and are completely concealed, meaning that their presence isn’t obvious. The device is also difficult to spot by using radio frequency scanning technology or code grabbing. This means that a thief must spend longer in order to successfully steal your vehicle.
To get around the system, thieves must know the unique pin code and the location of the Ghost. However, the pin code will be specific to you and may be altered as many times as you want. The pin code is easy for you to remember but mathematically impossible for anyone else to understand. The engineer will also have provided an emergency pin number in the event that you forget the pin.
The Ghost CAN Bus immobiliser is able to be installed in a matter of minutes on your vehicle. It works with all vehicles and can be completely customized to match your car’s look. It is also affordable and easy to use. You can even transfer the device to a different vehicle if you decide to change cars during the lifetime of ownership, providing that the new vehicle is compatible with it.
The CAN bus can be used with other security features. For example, it can detect the damage to your vehicle and notify the owner. It can also stop the engine if the car is tampered with. The system will safeguard your vehicle from hacking and key duplicate. It also detects vibrations and contact with the vehicle. It will also notify the owner when the vehicle is moved.
No OBD port hacking
Ghost is a hidden device that is connected to the CAN data network of your vehicle. This will stop thieves from hacking in to disable your alarm, disable your key fob and autowatch ghost immobiliser fitting make new keys. This technology is a significant improvement over the methods that were employed by thieves to steal vehicles in the past. The CAN data networks means that your system will not be affected when you disconnect or change your battery.
The Autowatch Ghost, the first non-detectable CAN bus immobiliser aftermarket worldwide, safeguards against key-cloning, hacking and replica car theft. It is not equipped with LED indicators or key fobs, instead using the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN sequence (up to 20 button presses) that needs to be entered prior to when you can drive your vehicle away.
Modern thieves can use diagnostics to detect circuit breakages in your vehicle. They can bypass immobilisers that require a lot wiring or are integrated into the wiring. The Ghost is weatherproof, doesn’t require additional wiring and cannot be detected by diagnostic tools of a professional. It can be even installed on vehicles with anti-theft equipment.
Another advantage of the Ghost immobiliser is that your vehicle can only be started by a person who has the PIN code and has physical access to your vehicle. This is a big advantage over traditional security systems which can be bypassed with simple cable manipulation, a screwdriver, or the use of a universal remote controller.
You can easily reset your PIN if you forget it using the emergency PIN reset feature on a computer or mobile phone. This is a great option if you need to start your car when it’s been left in a garage, or valet parking.
The Autowatch Ghost 2 is the most recent version of the product and is insurance approved by TASSA when installed by one of our authorized installers. It features a QR fingerprint system to identify parts that are not in use that allows for the return of stolen items if they are found. It can also be set to’service mode’ which permits the engine to start when your car is in a garage, autowatch ghost immobiliser fitting or with valet parking however, you must enter your PIN code once more to exit the car.