Ghost Immobiliser Installation
Secure your prized possessions from car thieves by putting in a ghost immobiliser. Our TASSA-verified system protects against hacking, key cloning and vehicle immobiliser bypass.
The system is hidden in your vehicle’s wiring loom and is invisible to anyone who looks. It operates by creating the pin code push sequence that is pushed through existing buttons on the steering wheel doors, door cards and the centre console.
No circuit cuts
It’s not surprising that owners are keen to secure the vehicle they have worked so hard to buy. Traditional security devices, like alarms or wheel locks, are easily manipulated by thieves. A ghost immobiliser on the other hand is a highly efficient solution that is silent and isn’t easily recognized by modern day thieves.
A ghost immobiliser is also known as a hidden device, is a device that connects to your vehicle’s data network CAN to disable the engine. It does this without the use of key fobs or radio frequencies. It communicates with the vehicle’s ECU by using buttons on the steering wheel, dash, and door panels to create an individual pin code that only you can access. The code can be altered at any time and can be as long as 20 digits long depending on what you prefer. It also comes with a secure emergency code that you can use if you forget your PIN.
The ghost immobiliser could also be used to stop relay boxes from transferring the car key’s signal inside your home, which could unlock the doors and then start the vehicle. It can also block high-tech methods to steal your vehicle, like OBD port hacking. The device is small, weatherproof and difficult to see. It’s also hard to tamper.
The ghost immobiliser has another benefit: it can be installed in your vehicle without leaving any permanent marks. This is ideal for those who are planning to resell their car in the future. It’s also much more efficient and less time-consuming to install than a factory-fitted system.
The Autowatch Ghost, a revolutionary technology, is a new generation device that prevents thefts from cars that are not connected to the CAN network of a vehicle and using the buttons to generate a unique PIN code. It is a discreet device that can be put in with no wires cut and does not require any additional key fobs. It is also connected to the original ECU of the vehicle, thus preventing thieves from using a different key. This system has been TASSA-verified and is compatible with an International Security Register. Owners will be able to rest easy, knowing that their vehicles are secured from theft.
No scanning with RF
You’ll want to secure your vehicle from theft if have spent an enormous amount of money and spent a lot of time customizing it. One way to do this is by installing an immobiliser. It will prevent your engine from starting unless you enter a unique pin code. You can create a 20-digit PIN by pressing the buttons on your dashboard or steering wheel. This will ensure that only you are able to drive your vehicle. It is also possible to create a service and valet mode that will allow you to start your car temporarily without entering the PIN. This allows technicians to work on your vehicle, without being present. This is a great option for people who want to reduce time and make their lives easier.
Ghost immobilisers, which are new generation device connects to the CAN data network of your vehicle. It uses the buttons on the dashboard and the steering wheel to create a PIN code. It is designed to be discreet, with no LED indicator or noise to give it away and can be placed anywhere on the vehicle without impacting the look of your pride and joy.
This stealthy device is TASSA approved and can cut down on your insurance costs. It also comes with the ability to track that can track your vehicle even if it’s been stolen. This is useful if you own a unique or expensive vehicle that you’ve spent lots of time personalising.
The Autowatch Ghost can be used in conjunction with an iPhone application to allow you to start your car remotely in the event you forget your PIN or are not able to access the vehicle due to a reason. This feature is perfect for those who need to collect your kids or run errands but don’t want to risk someone else driving your vehicle. This feature is beneficial in the event that you need to bring your vehicle in for repair or service.
Another benefit of the Ghost is that it is unable to transmit or detect radio frequency signals, making it undetectable to thieves using RF scanning or code grabbing technology. It is also able to protect your car against key copying and ECU swapping which are the most common methods of car theft.
No key cloning
Ghost immobilisers are a great option to protect high-end vehicles. They are designed to stop key replication. They stop your vehicle from being started until a PIN code has been entered with the standard key fob. This makes it extremely difficult for thieves to rob your vehicle, and may stop them from trying it in the first place. This is a good idea in the event that your vehicle has been extensively customized or if it’s a rare model.
These immobilisers connect to the vehicle’s CAN data network and are completely hidden, which means there is no visible indication of its presence inside the vehicle. The device is also difficult to detect using radio frequency scanning technology or code grabbing. This means that a criminal will have to spend much longer to get your car.
A thief will need to be aware of the unique pin sequence and the location of the ghost to get around it. But, the pin code will be specific to you and can be changed as often as you like. The pin code is easy for you to remember but mathematically unattainable for someone else to work out. In addition, ghost immobiliser Fitting the engineer will provide you with an emergency PIN code that can be used to bypass the pin in case you forget the pin.
The Ghost CAN bus immobiliser is weatherproof and can be installed in any part of your vehicle. It is compatible with all vehicles and completely customizable to match the style of your car. It is also very easy to use and cost-effective. You can even transfer the device to another vehicle if you switch cars during the lifetime of ownership, provided that the new vehicle is compatible with it.
The immobiliser on the CAN bus is compatible with a variety of other security features. For instance, it could detect the damage to your vehicle and warn the owner. It will also shut off the engine in the event that the car has been damaged. The system can protect your vehicle against hacking and key duplicate. It also detects vibrations or contact with the vehicle. In addition, it could alert the owner if the vehicle has been moved.
No OBD port hacking
Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from hacking in to disable your alarm, deactivate your key fob, or code new keys. This technology is a step up over the old methods employed by thieves to steal vehicles in the past. The CAN data network ensures that the system won’t be affected by disconnecting or changing the battery.
The Autowatch Ghost, the first non-detectable immobiliser for CAN bus aftermarkets worldwide, safeguards against key-cloning, hacking, and replica car theft. It doesn’t use LED indicators or key-fobs. Instead, it uses the buttons on your steering wheel, console, and door panels.
Modern thieves employ diagnostics to detect cuts in the circuit in your vehicle. They are able to bypass immobilisers that require a lot of wiring or are built into the wiring. The ghost 2 immobiliser fitting near me immobiliser fitting – just click Cse Google – is weatherproof and does not require any additional wiring. It is not able to be detected by professional diagnosis tools. It can be installed even on vehicles equipped with anti-theft devices.
A Ghost immobiliser has another major benefit: your car can only be started by a person who knows your PIN code and has physical access to your vehicle. This is a major benefit over security systems that can be bypassed with simple cable tampering, a screwdriver or the use of a universal remote controller.
You can easily reset your PIN if forget it using the emergency PIN override feature on your mobile or computer. This is a great option if you need to start your car when it’s in a garage or a valet parking service.
The Autowatch Ghost 2 has been certified for insurance by TASSA and can be installed by our authorized installers. It features a QR fingerprint system to identify specific parts that allow for the return of stolen items in the event that they are found. It can also be set to’service mode’ which permits the engine to start when your vehicle is in a garage, or with valet parking, however, you must enter your PIN code again to exit the vehicle.