ghost Immobiliser installation; lopez-Lehman.mdwrite.net,
Guard your precious possessions from car thieves by adding a ghost immobiliser. Our TASSA-certified system guards against hacking, key cloning and bypassing the vehicle immobiliser.
The system is hidden in your vehicle’s wiring loom It is inaccessible to anyone who is looking. It is operated by generating pin code push sequences through existing buttons on the steering wheel, door cards, and the centre console.
No circuit cuts
A car is a precious item that takes years of hard work to acquire, so it’s understandable why owners want to safeguard their vehicle from theft. Traditional security devices, like alarms or wheel locks can be easily bypassed by thieves. Ghost immobilisers are a extremely effective solution that works in a quiet manner and isn’t easily detected by modern thieves.
Ghost immobilisers is also known as a hidden device, is a device that communicates with your vehicle’s data network CAN to shut off the engine. It does this without using key fobs or radio frequencies. It communicates with the ECU of your vehicle via buttons on the steering wheel, dash and door panels. This generates an individual pincode that is only accessible to you. The code can be changed at any time and can be as long as 20 digits long, depending on the style you prefer. It also comes with an emergency code that you can use in the event that you forget your PIN.
The ghost immobiliser is also beneficial to stop the relay box inside your home from transferring the signal from your car key, which will open the doors and begin your vehicle. It can also block high-tech methods to steal your vehicle, such as OBD port hacking. The device is tiny, weatherproof and difficult to detect. It’s also hard to hack.
The ghost immobiliser has another advantage: it can be installed in your vehicle without leaving any permanent marks. It is ideal for those who are planning to sell their car in the near future. It’s also more efficient and less time-consuming to install than the factory-installed system.
The Autowatch Ghost is a groundbreaking next-generation device that blocks vehicles that are stolen through contactless by connecting to the vehicle’s CAN data network and using the existing buttons to generate a unique PIN code. It is a devious device that can be set up without cutting any wires and requires no additional key fobs. It can also be connected to the vehicle’s original ECU and prevents thieves from gaining access to it using an additional key or replacing the ECU with a “relay”. This system is TASSA certified and can be connected to an International Security Register, allowing owners to have peace of mind knowing their vehicles are protected against theft.
No scanning with RF
If you have invested lots of time and money in the customization of your vehicle, you will need to secure it from theft. One way to do this is to install an immobiliser. This will prevent the engine from starting until you enter a unique PIN. Using the buttons on your steering wheel and dashboard, you can generate an up to 20 digits in length that is only known to you, ensuring that only you can drive your vehicle. It is also possible to set up a service or valet mode that allows you to start your car temporarily without entering the PIN. This will allow your technician to work on your car without you being present. This feature is great for people who want to cut down on time and simplify their lives.
A ghost immobiliser is a next-generation device that connects to your vehicle’s CAN data network and uses the buttons on the dashboard and steering wheel to program a unique PIN code. It is designed to blend in, as it does not emit any noise or light indicator. It can be installed anywhere on your vehicle without altering the look of the vehicle.
This stealthy system is TASSA approved and could reduce the cost of insurance. It has a tracking function that can locate your vehicle, even if it’s stolen. This is great for those who own a unique expensive vehicle which you’ve invested many hours customizing.
The Autowatch Ghost can be used together with an iPhone application that allows you to start your vehicle remotely in the event that you forgot your PIN or not able to access the vehicle due to a reason. This feature is perfect for those who need to pick up the kids or go on errands, but don’t want to risk having someone else drive your vehicle. It is also helpful in the event that you need to bring your vehicle to a mechanic for maintenance or repair.
Another advantage of the Ghost is that it doesn’t transmit or detect radio frequency signals, making it unnoticeable to thieves who use RF scanning or code grabbing technology. It also has the ability to safeguard your car from key cloning and ECU swapping, which are common methods of car theft.
No key to cloning
Ghost immobilisers are an excellent option to protect high-end vehicles and are designed to prevent key replication. They stop your car from starting until an additional PIN code is entered alongside the standard key fob. This makes it very difficult for thieves to steal the vehicle, and may even deter them from attempting. This is a good idea in the event that your vehicle has been extensively customized or if it is a rare model.
These immobilisers are connected to the vehicle’s onboard CAN network and are completely hidden which means there is no indication of its presence in the vehicle. It is also difficult to detect by using radio frequency scanning technology or code grabbing. This means that a thief will need to invest a lot more time to steal your vehicle.
To bypass the system a thief must know the unique pin code and the location of the Ghost. But, the pin code is specific to you and can be altered as many times as you’d like. The pin code you choose is easy to remember, but mathematically impossible for Ghost immobiliser installation anyone else to decipher. The engineer will also have provided an emergency pin code in the event that you forget the pin.
The Ghost CAN bus immobiliser is weatherproof and can be installed in any location of your vehicle. It is compatible with any vehicle and can be fully customized to match your vehicle’s appearance. It is also simple to use and affordable. You can even transfer the device to a different vehicle if you change cars during the lifetime of ownership, as long as the new vehicle is compatible with it.
The CAN bus is compatible with other security features. It is able to, for instance, detect damage to the vehicle and notify the owner. It also can stop the engine if the car is tampered with. It also helps protect your vehicle from key cloning and hacking. It can also detect vibrations and contact with the vehicle. In addition, it could warn the owner if the vehicle has been moved.
No OBD port hacking
ghost immobiliser birmingham is a hidden device that is connected to the CAN data network of your vehicle. This prevents a thief trying to hack into your vehicle to disable your alarm, disable your key fob, and make new keys. This technology is a significant improvement over the traditional methods that have been employed by thieves in the past to take your vehicle. The CAN data network also means that the system will not be affected by disconnecting or changing your battery.
The Autowatch Ghost is the first aftermarket CAN bus that is a non-detectable immobiliser that guards against key-cloning, hacking, and replica car theft. It is not equipped with LED indicators or key-fobs, instead leveraging the buttons on your steering wheel, centre console and door panels to let you create a unique PIN code sequence (up to 20 button presses) that needs to be entered first before you can drive your vehicle away.
Modern thieves employ diagnostics to identify circuit cuts on your vehicle. They can bypass immobilisers that require lots of wiring or are integrated into the wiring. The Ghost is weatherproof, does not require additional wiring, and can’t be detected by professional diagnostic tools. It can even be fitted on vehicles with anti-theft devices.
Another advantage of a Ghost immobiliser is that your vehicle can only be started by someone who has the PIN code and has physical access to your car. This is a big benefit over traditional security systems which can be tampered with using simple cable alteration, a screwdriver or a universal remote controller.
You can easily reset your PIN in case you forget it by using the emergency PIN reset feature on mobile phones or computers. This is helpful if you need to start your car after it has been left in a garage or using a valet parking service.
The Autowatch Ghost 2 has been approved for insurance by TASSA and can be installed by our authorized installers. It comes with an RFID fingerprint system that can identify parts that are not in use that allows for the return of stolen items in the event that they are discovered. It can also be switched to’service mode’, which allows the engine to start when your car is parked in a garage or with valet parking, however, you’ll need to enter your PIN code again to exit the car.