UPVC Window Handle Replacement
It’s simple to replace a broken window handle with the right tools. However, it is essential to know your type of handle and the spindle length before buying a replacement.
Older uPVC windows feature cockspur handles for windows. They have a spur that protrudes to the lock of a wedge cockspur striker plate. They can be right-handed or left-handed and should be matched when replacing.
What kind of lock or handle do I have?
There are many kinds of window handles made from upvc and locks, each having their own benefits and purposes. The type of handle you have will determine the ease to open your windows and if the locking mechanism works as intended. As time passes, and with regular use the upvc handles that are on your windows can become damaged and worn out. This makes them less secure and effective. In certain instances, they might even fall off completely. If you notice that your upvc window handles have been removed, it’s crucial to fix them as soon as you can. This will help to prevent potential break-ins and keep your home safe.
It is a good thing that replacing your upvc window handles is a simple task that is achievable by almost anyone. You’ll require some basic tools, but with the proper knowledge, it’s an easy task that will only take a few minutes. To begin, you will need to identify the type of lock and handle you have on your window to help you identify the best replacement.
Inline Espagnolette Handles
They are the most popular type of upvc handles and are typically located on the side of your window. They have a flat design and come with an opening that is connected to the locking mechanism on the frame of the window when it is turned. Inline upvc handles have a spindle that runs through the middle of the handle and into the window frame to control the latch.
Cockspur Handles
These handles are typically found on older uPVC windows and feature distinct hook-shaped designs. Cockspur handles are attached to the frame of the window with one screw, and are less secure than other types of window handles.
Tilt and Turn Handles
The tilt and turn handles differ from other handles made of upvc in that they can be turned for opening the window, and then lowered to the window to let air circulate. In general, they have a 7mm spindle at the side of the handle. They are available in left and right-handed versions.
It is important to measure the spindle size when buying replacement handles made of upvc. Not all are the exact same size. To test the length of your handle made of upvc, simply drop something into the middle of the hole, and then measure how far it extends before it comes into contact with an obstruction. This is the largest spindle size that will fit into your windows.
What is spindles?
uPVC window handles operate similarly to doors. By turning the handle, you can open a latch in the frame. The window can then be opened and closed. However, sometimes handles can be damaged, especially when they are used frequently or exposed to harsh weather conditions. This can leave you needing to replace your uPVC handles for windows as they might not be able to operate the window in a proper manner anymore.
There are several different types of uPVC handles to choose from, including Espag, Cockspur and Spaded handle options. They are made in a variety of ways to fit into uPVC frames. Each handle type uses an entirely different spindle for locking the window mechanism. It is essential to determine the type of handle you have installed on your uPVC windows so that you can replace it with the correct one.
You can check what type of uPVC handle you are using by taking a look at the base of the handle. A snap-in cover should be over the screw that holds the handle’s base in place. Take it off and UPVC Window Handle Replacement you should be able see the second screw at the opposite end of the base section of the handle. After both screws have been removed, you should be able pull the handle from the uPVC.
Once you have removed the uPVC window handle, you will need to carefully remove the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You will need to purchase a replacement with the same length as the handle that was originally used and the locking device.
The spindle wears down and becomes inoperable with the locking mechanism. This can be caused by corrosion, damage from continuous use, or even the locking mechanism becoming looser. When this happens it is necessary to replace the window handle and locking mechanism to restore the full functionality to your uPVC windows.
How do I remove the handle that was previously attached?
Window handles are susceptible to being damaged or broken over time. It is crucial to repair them as quickly as possible to ensure your security. Fortunately, replacing a worn or damaged handle is a relatively easy task that can be accomplished in less than one minute and doesn’t require any special tools.
To remove the handle, you must first remove the screw at the bottom of the handle. Once the screw has been removed, the handle can be pulled away. Another screw will be located at the base of the handle. This can also be removed. After both screws are removed the handle can be completely detached from the base portion of the window.
After removing the old handle and fixing holes, Upvc Window Handle Replacement align the holes of the new handle with the holes that are already in the window frame. There may be a little cap or sticker on the new handle, so remove the caps if needed, and then put the handle in the frame. It is crucial to verify that the handle is working after it is installed. Turn the handle around and make sure the lock mechanism is in place.
Espag handles come with spindles that protrude from the handle and slot into the multipoint locking mechanism of the window frame. Cadenza windows have a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hang over the frame that surrounds the window or the transom crossmember of the bar.
After you have put in the new handle, slide the spindle into the window lock and tighten it. Once the handle is firmly fixed in place, replace the’snap in’ cover and the screw cap (if appropriate). Now that the handle is ready for use, open and close the window a few times to make sure it is working properly and securely.
How do I fit the new handle?
It’s not difficult to change the handle on your Upvc windows. The process is very simple. All you need is a screwdriver and little bit of patience. The first thing you need to do is to ensure that the old handle is not locked and then remove any screws that are visible. you can also replace these with screw caps if needed. After removing the handle, you need to make a note of the length of the spindle that extends from the back of the handle. This is vital as it will determine what kind of handle you will need to buy.
Espagnolette handles are the most popular kind of handle that is used on uPVC windows. The spindle passes through the handle to operate the locking mechanism within the window frame. The handle releases the latch, allowing the window to open. In regular use and over time, handles for espagnolette may be damaged.
Cadenza handles are a second type of uPVC window handle, which is typically used on tilt and turn windows. They have an extended blade that works the multipoint locking mechanism inside the window. They are generally more secure than espagnolette handles as they can only be opened from the inside. They can be replaced with the same procedure as espagnolette handles, however you must make sure that the new handle has an angled blade as opposed to a flat one.
Once you have determined the right handle to purchase, you can simply line up the new handle cost to replace windows uk the existing screw holes and then screw it in the appropriate position. Then, put the screws back on and make sure the new handle functions correctly. This is done by moving the handle from locked position to the unlocked and the reverse direction several times. It might be worthwhile to speak with an expert to see if you can resolve any issues. They can advise you on how to resolve the problem in a timely and efficient manner.