Why Should You Have a Ghost Immobiliser Installed?
Autowatch Ghost is the next-generation vehicle immobiliser. It safeguards your vehicle from theft. It works discretely by connecting to the vehicle’s CAN network, and requires that a unique, reversible PIN sequence is entered to start the vehicle.
The system is quiet and does not come with LED indicators and is undetectable using diagnostic tools. It is also TASSA-approved and recognized by a few insurance companies.
No key fobs or LED indicators.
Ghost immobilisers are a new technology in the field of car security that can prevent thieves from entering your vehicle, regardless of whether they manage to enter it. It connects to the onboard CAN data circuit in your vehicle and communicates silently so that there aren’t any radio signals or key fobs required, making it difficult for a thief to bypass it. It is also unrecognizable by diagnostics, and does not include an LED indicator which would indicate its location. This makes it a great choice for vehicles that are expensive or rare, such as vintage cars.
Autowatch Ghost is a small device that is able to be hidden inside the vehicle’s loom. This makes it almost impossible for thieves and other criminals to spot it. The device connects with the ECU to stop theft. It taps into the CAN (Controller Area Network) system. It is incredibly easy to install and can be set up in less than an hour. It is also less intrusive than some other physical anti-theft devices, for example steering wheel locks.
The device is built on the same technology used by GPS trackers, however it stops theft by stopping the vehicle from getting started. It uses buttons in your vehicle to generate a unique and Ghost immobiliser install changeable PIN code sequence that needs to be entered before you are able to drive your vehicle. The device can be programmed to utilize obscure buttons, such as those on the back of the rear demister, to make it harder for a thief to guess the PIN. This type of technology is becoming more and more popular, and a lot of insurance companies now require it for vehicles equipped with keyless entry systems.
The Ghost also blocks key cloning and hacking. The device is connected to your vehicle’s CAN bus and uses the buttons to generate an unique code that is able to be changed. This code must be entered to start the car. The device is not able to be beaten by modifying the ECU or adding new key fobs. The criminal will have to make use of a special tool in order to bypass the immobiliser.
The ghost immobiliser is purchased at a very low cost, and it can be paired with GPS tracking to ensure the security of your vehicle. It’s a great choice for older vehicles, and it can help you save money on your insurance costs. Contact Trackershop to get an estimate for a ghost immobiliser. We will include the installation in the cost so that you can feel confident about the security of your vehicle.
It is TASSA Approved
If you’re looking to secure your vehicle, an immobiliser is the best method to do it. It stops a vehicle from starting unless the correct PIN code is entered and also disables other functions like the starter motor or fuel pump. motor. It is crucial to have an immobiliser installed by a professional. Installers must be TASSA-approved as this will ensure that the product is safe to use and functions properly. The process involves confirming the installer’s credentials, including criminal records checks and identity verification.
The Ghost immobiliser has been designed to prevent thieves from stealing cars. It connects to the CAN data network of your vehicle and does not require for additional fobs, or aftermarket alarm systems. The system is quiet and isn’t detected by thieves or car trackers. The system makes use of buttons on the steering wheel, door panels and central consoles to generate a unique PIN. It is important to enter the correct sequence to start your car. This makes it extremely difficult for thieves.
This innovative immobiliser is TASSA-approved and can be installed by Trackershop, a company that specialises in the installation of this device. It also offers a variety of other security products for your vehicle, including an anti-theft tracker and a remote car starter. The team of technicians is completely mobile, and can install the device at workplace or at your home.
With more & more vehicles are being taken without owners’ keys, it is essential to ensure your car is secure. Modern keyless vehicles are especially vulnerable as it is easy to buy cloning equipment and door lock pick sets on the internet. Autowatch Ghost is an excellent method to protect yourself from this since it is not able to be detected by thieves and can’t even be detected by vehicle trackers.
The Ghost II CAN is completely concealed and is not able to be altered by thieves. It is able to detect attempts to modify the ECU and will shut down the parts of the engine in a bid to deactivate the immobiliser. In addition, it could even deactivate the alarm for cars to avoid the attention of thieves and allow them to escape in the vehicle.
It is reversible
The Ghost immobiliser can be fitted or removed at anytime. It is directly connected to your vehicle’s Controller Area Network (CAN) and protects you with an individual PIN code that only you know. When the PIN code is correctly entered, the car will not start and thieves will be discouraged from trying to steal it.
Installation of the ghost immobiliser installation near me does not affect your vehicle’s warranty. The system is compatible with any alarm or tracker you might have installed. It will not leave an imprint on the exterior or interior of your vehicle. In contrast to other immobilisers, it does not employ LED indicators or ghost Immobiliser install key fobs, which makes it difficult for thieves to find it.
Gangs of organized car thieves are currently using devices to read circuit wires in vehicles, however the ghost immobiliser Install Immobiliser does not use any of these methods. It makes use of buttons on the dashboard or the steering wheel to generate a unique PIN code. This code needs to be entered to start the vehicle.
The Ghost Immobiliser will also shield your vehicle from OBD port hacking. This kind of theft is becoming more prevalent and is among the most difficult ways to prevent. The Ghost Immobiliser can help prevent these thefts by preventing the criminal from connecting an electronic device to your vehicle’s OBD port and cloning your keys.
The Ghost can be used in conjunction with a vehicle tracking device. This can be very useful in locating your vehicle after it was stolen. However, it isn’t recommended that you utilize a tracker as the primary security measure to prevent theft because they cannot stop the theft by itself. They are also more easily to detect and remove than the Ghost immobiliser.
It is easy to install
A Ghost immobiliser, which is a revolutionary new technology, can help you safeguard your vehicle from theft. It works by connecting to your vehicle’s CAN (Controller Area Network) system and creating an individual code sequence that is impossible for thieves to crack. It’s a cost-effective and highly effective way to ensure your car is safe from theft.
Ghost is designed to work with all cars, including those that have aftermarket key fobs. The device creates an individual PIN code by using the buttons on your dashboard, central console, and the steering wheel. This stops thieves from starting up your vehicle. It also has other features, such as a GPS tracker to locate your vehicle.
This kind of device is a popular option for drivers as it can offer security against different kinds of car theft. It is simple to install, silent and doesn’t rely on radio signals. It’s also a good choice for those who do not need a complete alarm system. It is, however, essential to employ a professional to install the device to ensure it functions properly.
If you’re thinking about a ghost immobiliser, it’s important to have it professionally installed to ensure that it’s working exactly as it should. A professional will know how to find the best spot for it, and will also ensure that the device is properly connected to your vehicle’s electronic components. The installer will also make sure that the device is hidden from view and can’t be observed by anyone without a specific reason for knowing about it.
The Autowatch Ghost II CAN Immobiliser can be turned on to valet or service mode, which allows your vehicle to be driven at 30mph without the need for the access key. This makes it ideal for valet parking and transportation of your vehicle. It can also be used in this mode if your vehicle is being maintained by dealers. This mode is easily removed via the companion app and reset after every use.
The Ghost is the only aftermarket CAN bus immobiliser that does not require cutting wires. It is directly connected to the CAN system onboard of your vehicle. It’s not detected by devices for diagnosing or cloning. It is tamper-proof, silent, and doesn’t emit any radio signals. It is reversible, so you can move it to a different vehicle when you need to.